Model 101/2100 Doors Service & Installation
TITLE:
99-13312-S001 Model 101/2100 Doors Service &
Installation
5. Remove hinge pin plug access cover from hinged side of door.
6. Disengage safety snap from female plug, remove male plug from door and insert in
opposite end of door.
7. Remove torque rod by sliding it out bottom of door and insert in opposite end of door.
8. Model 101 & 2100 have only one female receptacle. When reversing door, also
reverse receptacle. Pull receptacle from one end and feed back down through
opposite end.
To Next Page
Loading...