112
Doc.Id. HMSI-27-212
Anybus CompactCom 40 EtherNet/IP
Doc.Rev. 1.5
Command Details: Delete
Category
Extended
Details
Command Code.: 04h
Valid for: Object Instance
Description
This command deletes a previously created socket and closes the connection (if connected).
• If the socket is of TCP-type and a connection is established, the connection is terminated with
the RST-flag.
• To gracefully terminate a TCP-connection, it is recommended to use the ‘Shutdown’-command
(see “Command Details: Shutdown” on page 114) before deleting the socket, causing the con-
nection to be closed with the FIN-flag instead.
• Command Details
• Response Details
(no data)
Field Contents Comments
CmdExt[0] Instance number to delete (low) Instance number of socket that shall be deleted.
CmdExt[1] Instance number to delete (high)
To Next Page
Loading...