Anybus CompactCom 40 EtherNet/IP User Manual

Doc.Id. HMSI-27-212
Anybus CompactCom 40 EtherNet/IP
Doc.Rev. 1.5
Chapter 10
10. Host Application Objects
10.1 General Information
This chapter specifies the host application object implementation in the module. The objects listed here
may optionally be implemented within the host application firmware to expand the EtherNet/IP imple-
mentation.
Standard Objects:
• Application Object (FFh) - (see Anybus CompactCom 40 Software Design Guide)
• Application Data Object (FEh) - (see Anybus CompactCom 40 Software Design Guide)
• Energy Control Object (F0h) - (see Anybus CompactCom 40 Software Design Guide)
• Assembly Mapping Object (EBh) - (see Anybus CompactCom 40 Software Design Guide)
• Modular Device Object (ECh) - (see Anybus CompactCom 40 Software Design Guide)
• “Sync Object (EEh)” on page 160
Network Specific Objects:
• “CIP Identity Host Object (EDh)” on page 158
• “EtherNet/IP Host Object (F8h)” on page 161
• “Ethernet Host Object (F9h)” on page 171
• “Application File System Interface Object (EAh)” on page 174
• “Functional Safety Host Object (E8h)” on page 156

Anybus CompactCom 40 EtherNet/IP Specifications

General

Brand	Anybus
Model	CompactCom 40 EtherNet/IP
Category	Control Unit
Language	English