CIP Objects 63
Doc.Id. HMSI-27-212
Anybus CompactCom 40 EtherNet/IP
Doc.Rev. 1.5
8.3 Identity Object (01h)
Category
Extended
Object Description
The Identity Object provides identification of and general information about the module.
The object supports multiple instances. Instance 1, which is the only mandatory instance, describes the
whole product. It is used by applications to determine what nodes are on the network and to match an
EDS file with a product on the network. The other (optional) instances describe different parts of the
product, e.g. the software.
If modular device functionality is enabled, a list of the modules in the slots can be retrieved and made
available to the network master by sending a get request to class attribute 100.
Instance attributes 1 - 7 can be customized by implementing the EtherNet/IP Host Object.
Additional identity instances can be registered by implementing the CIP Identity Host Object (host ap-
plication object).
See also ....
• “EtherNet/IP Host Object (F8h)” on page 161
• “CIP Identity Host Object (EDh)” on page 158
Supported Services
Class: Get_Attribute_Single
Get_Attributes_All
Instance: Get_Attribute_Single
Set_Attribute_Single
Get_Attributes_All
Reset
To Next Page
Loading...
Need help?
General
