Server Side Include (SSI) 49
Doc.Id. HMSI-27-212
Anybus CompactCom 40 EtherNet/IP
Doc.Rev. 1.5
Errors
In case an object request results in an error, the error code in the response will be evaluated and trans-
lated to human readable form as follows:
See also...
• “SSI Output Configuration” on page 50
Error Code Output
0 “Unknown error”
1 “Unknown error”
2 “Invalid message format”
3 “Unsupported object”
4 “Unsupported instance”
5 “Unsupported command”
6 “Invalid CmdExt[0]”
7 “Invalid CmdExt[1]”
8 “Attribute access is not set-able”
9 “Attribute access is not get-able”
10 “Too much data in msg data field”
11 “Not enough data in msg data field”
12 “Out of range”
13 “Invalid state”
14 “Out of resources”
15 “Segmentation failure”
16 “Segmentation buffer overflow”
17... 255 “Unknown error”
To Next Page
Loading...