Anybus CompactCom 40 EtherNet/IP - Page 73

CIP Objects 73
Doc.Id. HMSI-27-212
Anybus CompactCom 40 EtherNet/IP
Doc.Rev. 1.5
Class 3 Connection Details
• Explicit message connection
Class 3 connections are used to establish connections towards the message router. Thereafter,
the connection is used for explicit messaging. Class 3 connections use TCP transport.
- No. of simultaneous Class 3 connections: 6
- Supported RPI: 100 - 10000 ms
- T->O Connection type: Point-to-point
- O->T Connection type: Point-to-point
- Supported trigger type: Application
- Supported connection size: 1448 bytes
- Supported priorities: Low