Applied Biosystems QuantStudio 7 Flex User Manual

3.
(QuantStudio
™
7 Flex System only) If you have a Twister
™
Robot, toggle the power
buon on the rear of the Twister
™
Robot.
Note: The Twister
™
Robot is ready to use when the power LED illuminates.
4.
Power on the monitor.
5.
Power on the computer:
a.
Press the computer power buon, then wait for it to start.
b.
When the Login screen appears, enter your user name and password, then
click OK.
6.
Start the QuantStudio
™
Real-Time PCR Software:
a.
On the desktop, double-click QuantStudio
™
Real-Time PCR Software.
Note: If the shortcut is not present on the desktop, select Start4All
Programs4Applied Biosystems4QuantStudio Real-Time PCR Software
to start the software.
IMPORTANT! If the softw
are does not start, conrm that no other instances
of the instrument control software are open. If any instance of the software
is open, close it before starting the softwaree.
b.
If the QuantStudio
™
Real-Time PCR Softw
are Login appears, enter your
user name and password, then click Log In.
Note: Security is a separately licensed module. If y
our system requires this
module, contact Thermo Fisher Scientic.
Note: If the software displays the License Central screen after you log into
the software, your license le may have become corrupt. Contact Support to
obtain a replacement license le.
Appendix D P
ower on or off, store, and move
Power on the QuantStudio
™
6 or 7 Flex Real-Time PCR System
D
124
QuantStudio
™
6 and 7 Flex Real-Time PCR Systems v1.6 Maintenance and Administration Guide

Applied Biosystems QuantStudio 7 Flex Specifications

General

Brand	Applied Biosystems
Model	QuantStudio 7 Flex
Category	Laboratory Equipment
Language	English