Safety standards
Reference
Description
EU Directive 2014/35/EU European Union “Low Voltage Directive”
IEC 61010-1
EN 61010-1
UL 61010-1
CAN/CSA C22.2 No.
61010-1
Safety requirements for electrical equipment for measurement, control, and laboratory
use – Part 1: General requirements
IEC 61010-2-010
EN 61010-2-010
Safety requirements for electrical equipment for measurement, control and laboratory
use – Part 2-010: Particular requirements for laboratory equipment for the heating of
materials
IEC 61010-2-081
EN 61010-2-081
Safety requirements for electrical equipment for measurement, control and laboratory
use – Part 2-081: Particular requirements for automatic and semi-automatic
laboratory equipment for analysis and other purposes
EMC standards
Reference
Description
EU Directive 2014/30/EU European Union “EMC Directive”
EN 61326-1
IEC 61326-1
Electrical Equipment for Measurement, Control and Laboratory Use – EMC
Requirements – Part 1: General Requirements
FCC Part 18 (47 CFR) U.S. Standard “Industrial, Scientific, and Medical Equipment”
AS/NZS CISPR 11
Limits and Methods of Measurement of Electromagnetic Disturbance Characteristics of
Industrial, Scientific, and Medical (ISM) Radiofrequency Equipment
ICES-001, Issue 4
Industrial, Scientific and Medical (ISM) Radio Frequency Generators
Environmental design standards
Reference
Description
Directive 2012/19/EU European Union “WEEE Directive”—Waste electrical and electronic equipment
Directive 2011/65/EU European Union “RoHS Directive”—Restriction of hazardous substances in electrical
and electronic equipment
SJ/T 11364-2014 “China RoHS” Standard—Marking for the Restricted Use of Hazardous Substances in
Electronic and Electrical Products
For instrument specific certificates, visit our customer resource page at
www.thermofisher.com/us/en/home/technical-resources/rohs-certificates.html.
Appendix I Safety
Safety and electromagnetic compatibility (EMC) standards
I
178
QuantStudio
™
6 and 7 Flex Real-Time PCR Systems v1.6 Maintenance and Administration Guide
To Next Page
Loading...
