Applied Biosystems QuantStudio 7 Flex - Instrument consumables

Instrument consumables
The QuantStudio
™
6 and 7 Flex Systems support a series of specialized consumables
through interchangeable sample blocks. Use the consumables appropriate for the
sample block of your QuantStudio
™
6 or 7 Flex Systems.
Note: The QuantStudio
™
6 Flex System does not support the Array Card block.
WARNING! Use the at caps for 0.2 mL tubes and 0.1 mL tubes. Rounded caps
can damage the heated cov
er.
Sample block Consumable
Reaction
v
olume
96-well plate, 0.2 mL
• MicroAmp
™
Optic
al 8-Cap Strip
• MicroAmp
™
8-Tube Strips (0.2‑mL)
• MicroAmp
™
Reaction Tubes without Caps
(0.2‑mL)
• MicroAmp
™
96-Well Tray/Retainer Set
100 µL
• MicroAmp
™
Optic
al Adhesive Film
• MicroAmp
™
Optical 96-Well Reaction Plate
with Bar Code
100 µL
96-well plate, 0.1 mL
• MicroAmp
™
Optic
al Adhesive Film
• MicroAmp
™
Optical 96-Well Fast Reaction
Plate with Bar Code
50 µL
384-well plate
• MicroAmp
™
Optic
al Adhesive Film
• MicroAmp
™
Optical 384-Well Reaction Plate
with Bar Code
20 µL
TaqMan
®
Arr
ay Card
[1]
TaqMan
®
Arr
ay Card 1 µL
[1]
Q
uantStudio
™
7 Flex System only.
Chapter 1 Getting s
tarted
Instrument consumables
1
24
QuantStudio
™
6 and 7 Flex Real-Time PCR Systems v1.6 Maintenance and Administration Guide