APT 300XAC Series User Manual

118
RDE XX?
Read the selected total (Phase A + B + C) results once a test has completed.
Query only available in AC Program mode and AC Manual mode.
9.4.3 1Φ3W Queries
The following commands are used to query the instrument while in Parallel mode.
COMMAND
DESCRIPTION
AC Program Mode
AC Manual
Mode
DC Program Mode
DC Manual
Mode
TDL1N?
Testing L1-N meter data
Memory, Step, Status,
Freq, Volt, Curr, Power,
APeak, PF, Q, CF, VA,
Timer
Memory, Status,
Freq, Volt, Curr,
Power, APeak, PF,
Q, CF, VA
Memory, Step, Status,
Volt, Curr, Power, Timer
Memory, Status,
Volt, Curr, Power
TDL2N?
Testing L1-N meter data
TDL1L2?
Testing L1-L2 meter data
RDL1N XX?
Results L1-N meter data
RDL2N XX?
Results L2-N meter data
RDL1L2 XX?
Results L1-L2 meter data
TDL1N?
Read the selected L1-N meter values while a test is in process.
TDL2N?
Read the selected L2-N meter values while a test is in process.
TDL1L2?
Read the selected total (L1-L2) meter values while a test is in process.
RDL 1N XX?
Read the selected L1-N results once a test has completed.
RDL 2N XX?
Read the selected L2-N results once a test has completed.
RDL 1L2 XX?
Read the total (L1-L2) results once a test has completed.
9.4.4 Program Commands and Companion Queries
These commands are used to modify individual test parameters within each step.
Many of these commands require a parameter value to be included with the
command. The companion query command will read the parameter. The writing

APT 300XAC Series Specifications

General

Brand	APT
Model	300XAC Series
Category	AC Power Distribution
Language	English