the parameter, press the Enter soft key. To cancel the editing of the Single Step
Mode, press the Esc soft key. When the Enter soft key is pressed the Single
Step Mode is accepted and you transition into the next system parameter: Alarm.
4.3.4 Editing Alarm
Use the , soft keys to navigate to the Alarm parameter. Pressing the Edit soft
key will provide the following screen:
Alarm = indicates the status of the alarm volume that is programmed into the
instrument.
Alarm Range: indicates the alarm range that can be programmed into the
instrument.
Use the numeric keypad to enter in the alarm volume. Press the Enter soft key
to accept the parameter. To cancel the editing of the alarm volume, press the
Esc soft key. To move to the next system parameter for editing, press the Next
or Prev soft key. The Exit soft key is also available to return to the System
parameter screen. When the Enter soft key is pressed the Alarm volume is
accepted and you transition into the next system parameter: Contrast.
4.3.5 Editing Contrast
Use the , soft keys to navigate to the Contrast parameter. Pressing the Edit
soft key will provide the following screen:
To Next Page
Loading...
Need help?
General
