Two methods are available in selecting a memory.
1. Type in the memory number from the numeric keypad. Once you type in a
number a shaded black box (■) will begin blinking acknowledging the parameter
is being changed. You will also receive new text at the bottom of the display
“Enter to save, Esc to cancel”. To accept the data entry select the Enter soft key,
or to cancel the data entry select the Esc soft key.
2. Press the List soft key to bring up a list of all programmed memories of the
instrument. In order to get to the List soft key you will have to press the <more>
soft key one time. The display will look as follows:
Next you will press the List soft key to provide a list of memories programmed
into the instrument. The screen will look as follows:
Navigation through the memory list is handled by the , Page ^ and Page soft
keys. To select the memory list you must press the <more> soft key. The screen
To Next Page
Loading...
Need help?
General
