Wheels, Axles & Chains Argo Service Manual
WA-3
Detailed information on standard workshop and safety procedures, and general ser-
vicing operations is not included in this manual, which has been prepared to assist
qualied service personnel. ARGO assumes no responsibility or liability for PER-
SONAL INJURY or VEHICLE DAMAGE which results from any servicing proce-
dure performed, including those instructions outlined in this manual.
General Instructions
Improperly adjusted idler chains or poorly aligned idler shaft assemblies can result
in personal injury to the operator, extensive damage to brake disc sprockets and idler
shaft assemblies, and may lead to a costly and inconvenient break down o road.
Please ensure that the axle shafts are correctly aligned and that the drive chains and
chain tensioner system are in good working condition.
Improperly aligned axle shafts or incorrect chain tension can result in extensive dam-
age to drive chains and axle sprockets, and may cause wear on the vehicle frame and
oorpans. Please ensure that axle shafts are correctly aligned and that the drive
chains and chain tensioner system are in good working order.
WARNING
WARNING
WARNING
To Next Page