ES-11
Electrical System Argo Service Manual
Ontario Drive & Gear Limited www.argoutv.com
PH.(519)- 662-2840 FAX (519)- 662-2421
3. Pull the headlight lens assembly out through the hood area of the engine compartment
and place on a clean work bench for disassembly.
4. Replace each lens as required.
Installing The Headlight Lens Assembly
1. From the engine compartment side, maneuver the headlight/bracket assembly into po-
sition and align the holes in the mounting bracket with the 3 holes left open from the
removal procedure. Secure the headlight bracket with three (3) Rivet - 3/16 x 3/4 Black
2. Reconnect head lamp wiring.
Removing the Head Lamp Lens Assembly - Frontier Models (Low Beam Only)
To Next Page
Loading...
