113
Setting the TCS Value (Mode 6)
• Depress the “MODE”-button five times to change from
Mode 1 to Mode 6.
• Depress the “SEL”-button four times; an “S” appears in
the lower line and the next digit blinks.
• Depress the “SET”-button repeatedly until the desired
value appears.
• Confirm the entry with the “SEL”-button
Displaying the TCS-Value (Mode 6)
• Depress the “MODE”-button five times to change from
Mode 1 to Mode 6.
• The TCS-value appears in the second line of the
display with values of 1 to 9.
Note: The TCS-value must be set beforehand for the
film stock used.
Time Code
To Next Page
Loading...
Need help?
General