43
• Lock the magazine completely into the camera opening.
Note: The magazine drive gear engages automatically.
Lightly turning the knurled knob on the movement
block facilitates the precise engagement of the
gear wheel if necessary.
• Check that the magazine is firmly seated.
• With your right hand pull the film loop downwards out
of the camera ➪ photo. Then push it as far upwards as
possible until the loop can be positioned between the
movement plate and the film gate.
Note: The film cannot yet be completely placed into the
film channel.
• Turn the knurled knob ➪ photo on the movement until its
marking matches that on the movement block.
• Turn the movement locking lever towards the “OPEN”
position to swing the movement block away from the
film gate.
Camera Body
knurled knob knurled knob
To Next Page
Loading...
Need help?
General