Overview 39
What problems does it solve?
Since the RCP-3 can be mounted on the bottom of the TRINITY, the user can make the necessary
settings at any time.
In this way, the user can react spontaneously to changes in the camera setup and avoid unnecessary
downtime.
At the back of the RCP-3 there is a new kind of a radio module interface (RIA) in which the optional
RF-2400 Radio Module 2400 MHz can be mounted.
With the RCP-3 wireless mode, a second operator or the DOP can control the tilt and roll axis via the
Digital Remote Wheels DRW-1 ARRI wheels.
In addition, a technician can also take care of the PID and other settings, while the TRINITY operator
concentrates exclusively on the image and the framing.
To Next Page
Loading...
