Handset Installation and Configuration
CONFIGURATION MANUAL
Ascom d83 DECT Handset
• The handset’s extension number and IPEI are registered in the IP-DECT system. Refer to the Installation
and Operational Manual for your IP-DECT system.
• The handset is not subscribed to any systems.
The easy registration procedure is described in the handset user manual.
During the easy registration procedure, the handset User ID is set automatically to the same as the
extension number. The User ID is used to identify the handset when it is connected to WinPDM/Device
Manager and is visible in the Number column.
The User ID can be viewed in the handset by navigating to the menu: Admin menu → Device info → User ID.
See also examples of handset configurations that can be made in 5 Handset Configuration, page 14.
3.2.2 Manual Handset Installation in DECT System
The handset to be installed must not have any previous valid registrations. If it has a valid registra-
tion, unsubscribe the handset.
Subscribe
1. Assign an extension number for the handset in the IP-DECT system. Refer to the corresponding manual
for the IP-DECT system.
2. Subscribe the handset to the IP-DECT system. For information about the subscription procedure, refer
to the User Manual, Ascom d83 DECT Handset, TD 93434EN.
During the subscription procedure, the handset User ID is automatically set to the same as the extension
number. The User ID is used to identify the handset when it is connected to WinPDM/Device Manager and
is visible in the Number column.
The User ID can be viewed in the handset by navigating to the menu: Admin menu → Device info
→ User ID.
See also examples of handset configurations that can be made in 5 Handset Configuration, page 14.
8
TD 93426EN / 28 January 2022 / Ver. C
To Next Page
Loading...
Need help?
General
