CONFIGURATION MANUAL
Ascom d83 DECT Handset
Handset Configuration
− Deactivation code - the system specific code required to deactivate the absence (for example
“#23#”).
− PBX date format for user input - the PBX supported date format to be sent to the PBX when
activating an absence reason containing a date (for example “Vacation”). The date in the handset is
always entered in MMDD format. If the parameter is set to DDMM, the handset automatically
converts to the correct date format.
4. Select Lunch, Meeting, Trip, Vacation, Out and/or General absence X. Enter the following:
− Activation code - the system specific code for an absence reason, for example “0*”.
− Name - enter name of absence reason (only for General absence). The name is visible in handset.
− User input - specifies if time or date is required for the absence reason (only for General absence).
5.9 In Call Menu
The In Call menu let a user access a number of functions during a call. Some functions are:
• Always displayed
• Predefined but may be configured by the administrator
• Custom functions that may be configured by the administrator
5.9.1 Always Displayed
The following functions are always accessible during a call:
Function Description
Messaging Displays the "Messaging" menu and messaging functions available during a call.
Microphone Turn the microphone on or off.
The Messaging function may be hidden from the In Call menu via the WinPDM/Device Manager in the
following way:
1. Navigate to Customization → Visibility → Messaging.
2. Set the value of the Messaging parameter to Hide.
The Messaging parameter may also be set to Read only. This allows the user to access the
messaging function during a call but does not allow the user to delete sent or received messages.
The Microphone function cannot be hidden or removed from the In Call menu.
5.9.2 Predefined and Configurable Functions
These functions are normally displayed during calls. The administrator can add or remove a function from
the In Call menu by configuring the parameter associated with the function. The following functions can be
configured by selecting Edit parameters in the WinPDM/Device Manager or by opening and editing the
template file from the Templates tab.
Parameter Description
New call Start a new call during a conversation.
End current call End a call.
TD 93426EN / 28 January 2022 / Ver. C
19
To Next Page
Loading...
Need help?
General
