Handset Configuration
CONFIGURATION MANUAL
Ascom d83 DECT Handset
• Add name internal and external call: Additional detail about the caller is displayed if there is information
about the caller in the local phonebook. If there is no entry for the caller in the phonebook, only the
display management text is displayed. This option applies when both internal and external calls are
received.
• Add name external call: Displays additional caller detail as described above, but only when external
calls are received.
Systems → System X → Display calling party number together with name
The parameter can be set to one of the following values:
• Yes: The handset shows the calling party number together with name.
• No: The parameter is disabled. This is the default value.
5.36 Services
This feature is only applicable for some handset variants, see 1.1 Functionality Matrix, page 1.
From WinPDM/Device Manager, up to 10 services can be configured that can be accessed from the
Services menu. Soft keys can also be configured to access services quickly. A list of predefined functions
are available such as Phone call, Send message and Send data.
5.36.1 Add Service
1. Select Services.
2. Select the service (1 - 10) to be configured.
3. In the Name field, enter the name of the service. The service name is displayed in the handset.
4. In the Type drop-down list, select the function (Send Message, Phone Call or Send data) to be used.
5. If needed, in the Number field, enter the destination number for the message/call/data. The following
values can be entered in the Number field: Digits 0-9, #, *, P – pause, H – hook.
If the Phone call function was selected, an additional character U can be entered in the Number field.
The handset prompts the user to enter numerical characters before establishing a call (procedure call).
6. If needed, in the Prefix field, enter the prefix to be used.
5.36.2 Delete Service
1. Select Services.
2. Select the service (1 - 10) to be deleted.
3. In the Name field, delete the name of the service.
5.37 Protect Registration from User Deletion
A registration can be protected from deletion via the handset menu by altering the parameter Protected
flag. In a template or from the Number tab in WinPDM/Device Manager, the parameter is found at:
Systems → System X → Registration data
52
TD 93426EN / 28 January 2022 / Ver. C
To Next Page
Loading...
Need help?
General
