CONFIGURATION MANUAL
Ascom d83 DECT Handset
Handset Configuration
5.5.2 Upload a Local Phonebook File
Important
When uploading a local phonebook file, local phonebook entries in the handset are replaced
by the entries in the file.
1. In WinPDM/Device Manager, go to the Numbers tab and select handsets.
2. In the Number menu, select Import contacts → From file.
3. Select the file to be imported and click Open.
5.6 Call Services
Call services is a configurable menu in the handset. The purpose of the Call services menu is to provide a
user friendly access to system dependent functionality such as absence handling and call diversion.
The menu is described in User Manual, Ascom d83 DECT Handset, TD 93434EN.
In addition to the default Call services functions, up to 10 extra system specific call services can be defined
by codes. The codes can be programmed in the following ways:
• with the digits 0-9
• with the special characters # and *
• With the following uppercase characters:
− P – pause
− H – hook, that is, auto disconnection
− U – the handset prompts the user to enter numerical characters for making a procedure call
The programming of the menu is done with WinPDM/Device Manager.
Using the WinPDM/Device Manager and the “Edit template” feature, the parameter can be found at
Systems → System X → PBX Settings → In call functionality → General purpose X.
The handset supplier may have a template example that configures the call services menu for the
PBX.
5.6.1 Activate or Deactivate Call Services when Changing Profile
A Call service can be activated or deactivated when changing a profile in the handset. This feature can be
used to send feature access codes, for example *21*, to the system when the handset changing profile.
1. If needed, configure the Call services to be used for the profiles, respectively. See 5.6 Call Services,
page 17.
2. Select User Profiles → User Profile X (where X represents 1 - 4).
3. Select Presence and diversion → Call services.
4. In the When activated and When deactivated drop lists, select the Call services to be used when the
profile is activated and deactivated.
A profile can be activated when placing a handset in a charger, see 5.16.1 In Charger Action when
not in Call, page 26.
TD 93426EN / 28 January 2022 / Ver. C
17
To Next Page
Loading...
Need help?
General
