Handset Configuration
CONFIGURATION MANUAL
Ascom d83 DECT Handset
The handset plays the original message alerts that are mapped to the beep codes.
1. Select Settings → Sound and Alert.
2. In the Message alert drop-down list, select Beeps according to beep code.
Table 4 High beeps according to beep code
Beep code sent from a system/application The handset plays
Beep code 0 No message alert is played
Beep codes 1- 6 1 - 5, and 10 beeps
Beep code 7 Siren
The handset plays the message alerts that are mapped to beep codes but with a higher tone.
1. Select Settings → Sound and Alert.
2. In the Message alert drop-down list, select High beeps according to beep code.
Table 5 Enhanced beeps according to beep code
Beep code sent from a system/application The handset plays
Beep code 0 No message alert is played
Beep codes 1 -3 1 - 3 beeps
Beep code 4 3 tones chime
Beep code 5 10 beeps
Beep code 6 Alarm sweep
Beep code 7 Siren
The handset plays extended message alerts that are mapped to the beep codes.
1. Select Settings → Sound and Alert.
2. In the Message alert drop-down list, select Enhanced beeps according to beep code.
Table 6 Custom sounds according to beep code
Beep code sent from a system/application The handset plays
Beep code 0 No message alert is played
Beep codes 1- 7 Corresponding customized sound
The handset can play customized message alerts that are mapped to beep codes. The message alerts must
first be customized and then mapped to the beep codes.
Customized sounds may also be mapped to enhanced beep codes, as described in A.1 Customize the
Default Handset Beeps, page 72.
It is recommended to use this feature to create a message alert that sounds like an item of equipment, such
as a respirator, that generates an alarm.
46
TD 93426EN / 28 January 2022 / Ver. C
To Next Page
Loading...
Need help?
General
