TD 92599EN
1 September 2011/ Ver. B
User Manual
Ascom i62 VoWiFi Handset
34
6 Press “Search”.
7Press “Call”, or to make the call.
6.3 In Call
Note: Some of these functions are system-dependent. The parameters are set up in the
Device Manager, refer to the Configuration Manual, Ascom i62 VoWiFi Handset,
TD 92675EN, and Installation and Operation Manual, Portable Device Manager (PDM),
TD 92325EN.
6.3.1 Adjust the Volume during a Call
Press to increase the volume, and to decrease the volume. The VoWiFi Handset will
now store and keep the new volume level.
6.3.2 Open Contacts during the Call
Note: If configured in the Device Manager, it is possible to call an emergency call while the
VoWiFi Handset/keypad is locked. During the ongoing emergency call, the soft key “More” is
disabled.
1 Press “More” during the call.
2 Select “Contacts” .
3Press “Select”.
4 Select “Call contact” for searching a local or company phonebook contact, or select
“Central phonebook” for searching a central phonebook contact.
5Press “Select”.
6 Select or search contact.
It is possible to call the selected contact by pressing “Call” or . When calling the contact,
the first call will be put on hold. See also 6.3.4 Start a New Call during Conversation on page
35.
6.3.3 Turn the Microphone On/Off during a Call
Note: If configured in the Device Manager, it is possible to call an emergency call while the
VoWiFi Handset/keypad is locked. During the ongoing emergency call, the soft key “More” is
disabled.
1 Press “More” during the call.
2 Select “Microphone off”.
3Press “Select”.
The icon indicates a silenced microphone. This means that the other part in an ongoing
call cannot hear you. To turn the microphone back on, do as follows:
1 Press “More” during the call
2 Select “Microphone on”.
3Press “Select”.
It also possible to turn the microphone off/on by a long press on or .