ASCOM i62 VoWiFi User Manual

TD 92599EN
1 September 2011/ Ver. B
User Manual
Ascom i62 VoWiFi Handset
35
6.3.4 Start a New Call during Conversation
Note: If configured in the Device Manager, it is possible to call an emergency call while the
VoWiFi Handset/keypad is locked. During the ongoing emergency call, the soft key “More” is
disabled.
1 Press “More” during the call.
2 Select “New Call”.
3Press “Select”.
4 Enter the number and press , or “Call”.
6.3.5 Switch between Calls
Prerequisite,
a new call has been started during conversation, see 6.3.4 Start a New Call
during Conversation on page 35.
1 Press the left soft key “Switch”. The first call is put on hold and is indicated with .
The ongoing call is indicated with .
If desired, repeat the step above to switch between the calls.
6.3.6 End a Call
Prerequisite,
a new call has been started during conversation, see 6.3.4 Start a New Call
during Conversation on page 35.
1 Select the call to end by using and on the Navigation key.
2 Press the right soft key “End”. The selected call ends.
3 If needed, press the left soft key “Retr.” to resume the remaining call.
6.3.7 Transfer a Call
Prerequisite,
there are two ongoing calls.
1 Select the call on hold using and on the Navigation key.
2 Press “More”.
3 Select “Transfer”. The two calls are connected. “Tranferred” is displayed and the
VoWiFi Handset enters idle mode.
6.3.8 Transfer to New Call
Prerequisite,
a new call has been started during conversation, see 6.3.4 Start a New Call
during Conversation on page 35.
1 Select the soft key “Transf.”. If there is more than one ongoing call, press “More”, and
then select “Transfer to new”.
2Press “Select”.
3 Enter the number to the person the ongoing call will be transferred to. It is also
possible to make a phonebook lookup to select a contact in the local
phonebook and the company phonebook.
4 Press the soft key “Call” or to transfer the call.

ASCOM i62 VoWiFi Specifications

General

Brand	ASCOM
Model	i62 VoWiFi
Category	Handsets
Language	English