Page 59
Advice
This option could cause unexpected actions during work
with the programmer such as switching the application on
or starting the UP program.
▸ Save fuses in UP instead of data file
This option allows to save fuses in ini file or UP projekt file
even for devices which by default have their fuses saved
in a data file.
▸ Project storing style
This panel allows you to set how projects should be saved
when exiting UP. Available options are: save
automatically, ask before saving or keep the original file
(i.e. do not save).
▸ Load last project on start-up
This option allows you to set if on the next UP start it will
open the project file, which was open on program
closing.
Options ➙ Program settings ➙
Colors
Keyboard shortcut: Shift+F10
This is where you can change and save colors of HEX
editors so that they suit your needs and your aesthetic
preferences.
A front color, a background color and a font can be
selected for all the listed text segments.
Options ➙ Program settings ➙
Editors
Keyboard shortcut: Shift+F10
▸ Code/main memory editor: show words
as bytes
Individual words can be displayed by bytes in case of
devices with 16-bit-long words.
▸ Code/main memory editor 8 words
wide
This option narrows the editor from the original sixteen
cells down to eight. The option is suitable especially for
small monitors. It can change automatically when a
different device type is selected.
The same option can be set for others memories:
▸ Data memory editor 8 words wide
▸ Boot memory editor 8 words wide
▸ Show only the lowest byte of word in
ASCII
When this option is activated, the program shows the
ASCII translation of only the lowest byte of word, which
can be useful especially for PIC MCUs.
▸ Mask ID positions while reading from
device, from file, etc.
Some manufacturers' specifications recommend saving
only masked data (with only four bits usable) in ID
positions. With this option activated, the program always
applies this bit mask when reading ID positions from
different sources.
▸ Mask ID positions during direct user
input
With this option activated, the program applies the bit
mask to each user-modification of ID positions. For further
information see ▸ Mask ID positions while reading from
device, from file, etc..
To Next Page
Loading...