Operation 4
STERRAD VELOCITY Reader User’s Guide 21
Manual Entry of Cycle Information
Using the cycle printout as a reference, ll in the information about the sterilization
cycle and touch Next. Touch Yes to conrm that the information is correct. Touch No to
return to the previous screen.
9 Note: Ensure that the time is synchronized between the reader and the Sterilizer
to proceed to the next screen
Figure 13. Manual Entry of Cycle Information
Activate the Test BI
Follow the on-screen instructions to activate the BI (see illustrations below).
If using a STERRAD VELOCITY BI Activator (43250), follow the activation instructions
supplied with the Activator. Touch Activated once complete.
To Next Page
Loading...
