8 Troubleshooting
58 STERRAD VELOCITY Reader User’s Guide
System Error Messages
The system continuously monitors itself to ensure it is operating correctly. If a
system error is encountered, it will alert the user with an error code and instructions.
Contact ASP if you are presented with an error code. Any BI’s that were incubating at the
time of the error are invalid and the load should be reprocessed with a new BI.
Call Your ASP Representative
If you encounter a problem or a system message that is not covered in this User’s
Guide, do not attempt to perform repairs or adjustments to the STERRAD VELOCITY
Reader. Call your local ASP Representative for more information.
To Next Page
Loading...
