Associated Research 620L User Manual

88
COMMAND
NAME
DESCRIPTION
*TST?
Self-Test Query
00H=OK
01H=TEST EEPROM ERROR
*CLS
Clear Status Command
Clear Standard Event Status
Register
Clear Service Request Register
*OPC
Operation Complete Command
When all selected pending
operations complete, ESR BIT0=1
*OPC?
Operation Complete Query
When all selected pending
operations complete, Output
Queue=1
*WAI
Wait-to-Continue Command
*PSC {1|0}
Power-on Status Clear Command
1 = Power-on clear enable
registers
0 = Power-on load previous enable
registers
*PSC?
Power-on Status Clear Query
*ESR?
Standard Event Status Register
Query
0 - 255
*ESE <value>
Standard Event Status Enable
Command
value = 0 - 255
*ESE?
Standard Event Status Enable
Query
0 - 255
*STB?
Read Status Byte Query
Read Status Byte
*SRE
<value>
Service Request Enable Command
value = 0 - 255
*SRE?
Service Request Enable Query
0 - 255
*IDN?
Read the instrument identification string. Company = Associated Research Inc.
*RST
Reset the instrument to original power on configuration. Does not clear Enable
register for Standard Summary Status or Standard Event Registers. Does not clear
the output queue. Does not clear the power-on-status-clear flag.
*TST?
Performs a self-test of the instrument data memory. Returns 0 if it is successful or 1 if
the test fails.
*CLS
Clears the Status Byte Summary register and Event registers. Does not clear the
Enable registers.

Associated Research 620L Specifications

General

Brand	Associated Research
Model	620L
Category	Test Equipment
Language	English