4. PROGRAMMING INSTRUCTIONS
4.1. Power Up
The 620L automatically defaults to the Main Menu screen upon power up. The Main
Menu screen will appear as follows:
From the Main Menu screen three menus may be accessed: Setup System, Setup
Tests, and Perform Tests.
4.2. Setup System
From the Main Menu screen press the “Setup System” soft key. The Setup System
screen will now be displayed. From the Setup System screen six different hardware
and software controls may be accessed: Time and Date, Calibration Alert, Hardware,
Security, Power-On Screens. Pressing the EXIT key at any time will return you to the
Main Menu screen.
To Next Page
Loading...
Need help?
General
