Introduction
This section contains information for the unpacking, inspection, preparation and
storage of your Associated Research, Inc., product.
2.1. Unpacking and Inspection
2.1.1. Packaging
Your instrument was shipped in a custom foam insulated container. If the shipping
carton is damaged, inspect the contents for visible damage such as dents, scratches
or a broken display. If the instrument is damaged, notify the carrier and Associated
Research, Inc.’s customer support department. Please save the shipping carton
and packing material for the carrier’s inspection. Our customer support
department will assist you in the repair or replacement of your instrument. Please do
not return your product without first notifying us and receiving an RMA (return material
authorization) number. To receive an RMA number, please contact our customer
support department at 1-800-858-TEST (8378).
2.1.2. Contents of the Carton
Inside the carton should be the following:
High Current Input LINE Cable
High Current Input NEUTRAL Cable
High Current Output LINE Cable
High Current Output NEUTRAL Cable
High Current GND Cable Red
Fuse 2A 250V Slow Blow 20mm
Bracket Rack Mount 3U (Qty 2)
Handle Rack Mount 3U (Qty 2)
Screw M4 x 12mm FHMS (Qty 4) for Rack
Mount Handle
Only accessories which meet the manufacturer’s specification
shall be used.