INTERCONNECTION
CAPABILITY WITH
MODULAR SCANNER
The 620L can be connected to an Associated
Research, Inc. SC6540 Modular Scanner for
multi-point testing capability.
RMS AND PEAK LEAKAGE
CURRENT READINGS
Select to monitor leakage current using RMS or
Peak readings during Line Leakage testing.
40 AMP CONTINUOUS
CURRENT CAPABILITY
The 620L can handle loads that require up to 40
Amps of continuous current during Line Leakage
and Run testing.
CONTINUOUS POWER
OUTPUT SELECTION
Power runs continuously between test steps for
more efficient testing.
INTERCONNECTION
CAPABILITY WITH
ASSOCIATED POWER
TECHNOLOGIES AC POWER
SOURCE
The 620L may be connected with an Associated
Power Technologies power source for clean DUT
power. Up to 7 pre-set memories may be
selected from the 620L menu system DUT’s that
require multiple input waveforms.
The 620L contains a built-in GFI circuit that
monitors DUT input power. This feature
safeguards the operator if excessive current
flowing to ground is detected.
To Next Page
Loading...
Need help?
General
