To Next Page

To Previous Page

7.4.4. Test Parameter Editing Commands and Companion Queries

These commands are used to modify the test parameter within each step. These

commands require a parameter value to be included with the command. The

companion query command will read the parameter. The writing of the parameter

requires that the unit not be included with the value, only the numeric value should be

included with the command. Also, when the query commands are used the response

will not include the unit’s characters. Many of the commands will function the same

way for multiple test types; however, the input range may be different and therefore

used a different possible set of values.

COMMAND

NAME

TEST

TYPES

VALUE

EACDC {0|1|2}

EACDC?

Edit AC/DC Mode

LLT

0=ACDC, 1=AC, 2=DC

ECH < value >

ECH?

Edit Current-HI

RUN

0.00 - 15.00A

ECL < value >

ECL?

Edit Current-Lo

RUN

0.00 - 15.00A

ECTN {1|0}

ECTN?

Edit Continuous

Power

LLT

RUN

1=On, 0=Off

EDE < value >

EDE?

Edit Delay

RUN

LLT

0.0 - 999.9s

EDW < value >

EDW?

Edit Dwell

RUN

0.0 - 999.9s

EEM {1|0}

EEM?

Edit Extended

Meter

LLT

1=On, 0=Off

EG {1|0}

EG?

Edit Ground

LLT

1=Open, 0=Close

ELH < value >

ELH?

Edit Leakage-HI

RUN

0.000 - 10.00mA

ELL < value >

ELL?

Edit Leakage-LO

RUN

0.000 - 10.00mA

ELM {1|0}

ELM?

Edit Leakage

Mode

LLT

1=Peak, 0=RMS

{0|1|2|3|4|6|8|9}

EM?

Edit Meas-Device

LLT

0=UL544NP

1=UL544P

2=IEC60601, UL2601

3=UL1563

4=IEC60990 FIG4-U2,

IEC 60950

6=IEC60990 FIG5-U3

8=External

9=Frequency Check

EN {1|0}

EN?

Edit Neutral

LLT

1=Open, 0=Close

EPFH < value >

EPFH?

Edit PF-HI

RUN

0.000 - 1.000

Brand	Associated Research
Model	620L
Category	Test Equipment
Language	English

Associated Research 620L User Manual

Table of Contents

Questions and Answers:

Associated Research 620L Specifications

Related product manuals