Chapter 4 – Functions of the instrument
UM-18400E-U ATEQ F580 User manual Page 101/168
n) 24V Auxiliary outputs
On the instrument main board there are four programmable electrical outputs (24V DC /
100 mA maximum, outputs).
Unlike the
valve code outputs, the auxiliary outputs reserved for a pneumatic function
are identified by the name of the function: stamping, automatic connector, etc. When
they are free and available for the operator to use they are called: auxiliary and the
position number.
Associated parameters to be adjusted: Auxiliary 1, Auxiliary 2, Auxiliary 3, Auxiliary 4.
) Select the option and enter settings if necessary.
Aux 4
AUTO J1
AUX J10
Aux 3
+ 24 V
Aux 2 Aux 1
+ 24 V
Gnd
To Next Page
Loading...