Chapter 4 Functions of the instrument
UM-18400E-U ATEQ F580 User manual Page 129/168
Notes:
1) if a vacuum test is used, the negative pressure thresholds keep their mathematical
“order”.
PRESSURE MEASUREMENT
VACUUM MEASUREMENT
0
PRE-FILL
THRESHOLD
PRE-FILL
THRESHOLD
MINIMUM
REJECT
THRESHOLD
MAXIMUM
REJECT
THRESHOLD
0
MINIMUM
REJECT
THRESHOLD
MAXIMUM
REJECT
THRESHOLD
2) In the event of the installation of an electronic regulator and pre-fill in the test cycle,
the automatic calculation of the maximum pre-fill threshold is equal to the maximum fill
threshold.
It is however possible to manually adjust this parameter to return it to the best possible
value for the pressure monitoring.
To Next Page
Loading...