Chapter 4 Functions of the instrument
UM-18400E-U ATEQ F580 User manual Page 132/168
Note: if an electronic regulator is installed, the auto zero cycle can be used to calculate
the three points on the regulator (points at 20 %, 50 % and 80 % of the maximum
pressure which can be supplied by the regulator, the value depending on the supply
pressure at the input).
Note 2: during the auto zero cycle, only the cycle start is memorised.
3.3.4. Piezo reset cycle planner
START
Piezo
reset
End of
cycle
5 min
5 min 5 min
test cycle
> 3 sec
test cycle test cycle
> 3 sec < 3 sec
To Next Page
Loading...