ATEQ F580 - Page 77

Chapter 4 Functions of the instrument
UM-18400E-U ATEQ F580 User manual Page 67/168
1.4.3. "COMPACT" display
This display enables the visualisation of summarised measurement unit results, this
includes the good or bad part result for each measurement unit.
Example with two measurement units:
In this mode, it is possible to display a
maximum of 10 measurement units (Hxx).
ATEQ C540
OK H01 NOK
OK H02 NOK
11:56:57 01/07/2002
Display of the results:
Good part result:
OK
H
01
NOK
Bad part result:
NOK
OK
T01
Warning:
OK
T01
NOK
1.4.4. "RESULTS" display
This display mode writes the result at the end of each cycle for the measurement units
(HXX) selected.
In these results there is the measurement unit number (Hxx), test result and
measurements.
Example:
ATEQ C540
H01 01 (OK) 010 Pa 300.8 mbar
H02 01 (OK) 001 Pa 200.0 mbar
H01 01 (OK) 022 Pa 301.2 mbar
H02 01 (OK) 005 Pa 201.4 mbar
H01 01 (OK) 018 Pa 299.5 mbar
H02 01 (OK) 007 Pa 202.2 mbar
H01 01 (OK) 002 Pa 300.1 mbar
H02 01 (OK) 001 Pa 199.4 mbar
H01 01 (OK) 011 Pa 300.4 mbar
H02 01 (OK) 012 Pa 200.4 mbar
11
:
56
:
57
01/07/2002