Chapter 4 Functions of the instrument
UM-18400E-U ATEQ F580 User manual Page 76/168
1.6.2. 2) "NETWORK STATUS" menu
This menu displays the operational, communication and measurement unit conditions of
the network (counting of the errors and communication fails).
In good communication conditions, the "time out" and "crc" counters must stay at 0
(zero), the "transaction" counters must evolve continually.
Display of the status of the network.
In the event of a unit communication
problem, the icon appears where
the measurement unit (head) is
displayed.
NETWORK STATUS
H01 H02 H03
F5 F5 INT
In the network status mode, when the
ENTER key is pressed, the network
measurement unit communications
status appears.
The display of the other elements is
activated by pressing on the left and
right arrows.
H01: F5 :
TIME OUT CRC COM
00000 00000 0221232
On the first installation, it is necessary to configure the network, refer to Chapter 3
paragraph 2. "Start-up of the network".
1.6.2. 3) "I/O STATUS" menu
This menu allows the display the status of the J7 (all or nothing outputs) and J8 (inputs)
connector inputs and outputs.
Enter the "I/O STATUS" menu. The
validated outputs and inputs are
represented by a black rectangle.
I/O STATUS
1 14
INPUTS
OUTPUTS
To Next Page
Loading...