Chapter 4 Functions of the instrument
UM-18400E-U ATEQ F580 User manual Page 77/168
1.6.2. 4) "REMOVE" menu
This menu enables the management of the measurement units (heads) in the network,
but also to delete them when they are no longer required.
Enter the "NETWORK SERVICE
REMOVE" menu and confirm.
SERVICE
CENTRAL
HEAD 01 : F5 : HEADX1
HEAD 02 : F5 : HEADX2
PARAMETERS
NETWORK
PROPERTIES
NETWORK STATUS
REMOVE
16:40:36 20/08/2002
Next, select the measurement unit
(head) to be deleted from the network.
SERVICE
CENTRAL
HEAD 01 : F5 : HEADX1
HEAD 02 : F5 : HEADX2
PARAMETERS
NETWORK
PROPERTIES
NETWORK STATUS
ADD
REMOVE
09:54:02 02/07/2002
HEAD01 :F5
HEAD02 :F5
HEAD03 :I/O
In the event of a measurement unit (head) being removed in the network, it remains
available in the event of an ulterior usage. The "ADD" menu then appears in the list.
In the event of a definitive deletion of a measurement unit, you must reinitiate the
network and identify the measurement units (heads) one by one, refer to paragraph
1.5.1.1) "Installation menu".
To Next Page
Loading...