Chapter 4 Functions of the instrument
UM-18400E-U ATEQ F580 User manual Page 79/168
1.6.2. 6) "REPLACE" menu
This menu allows the replacing of one measurement unit in the network by another in
the event of a breakdown for example.
This operation can only be carried out if the replacement unit if absolutely identical to
that which it is replacing (hardware and software version).
Switch off the instrument or make sure it is off.
Physically add the replacement measurement unit in the network
(cabling).
Switch on the central, the network
initiates.
C 540 VX.XXi
STARTUP
Enter the "NETWORK MAINTENACE
REPLACE" menu and confirm.
SERVICE
PARAMETERS
NETWORK
PROPERTIES
NETWORK STATUS
I/O STATUS
ADD
REPLACE
WITHOUT PARA.
REMOVE
16:36:26 24/07/2002
The replacement "with parameters"
allows the transfer of the programs
contained in the old unit to the new unit.
The replacement "without parameters"
allows the changing of a unit without
transferring the parameters, the
parameters of the new unit are
conserved or they must entered if they
have not been created
SERVICE
PARAMETERS
NETWORK
PROPERTIES
NETWORK STATUS
ADD
REPLACE
WITHOUT PARA.
WITH PARA.
REMOVE
16:38:21 24/07/2002
To Next Page
Loading...