10. Storage
Drain the cooling water from the dry pumping system. If transporting or storing it
in conditions where the cooling water could freeze, refer to Draining the cooling
water on page 108. Failure to observe the instructions could result in the cooling
water freezing in the dry pumping system and damage to the pumps and/or the
cooling water pipelines.
Store the dry pumping system as follows:
1. Follow the procedure set out in Relocate the dry pumping system for
maintenance on page
107.
2. Store the dry pumping system in clean dry conditions until required.
3. If the pump is to be stored for longer than six weeks, it must be manually
rotated every 14 days or less. Contact us for details.
4. When required for use, prepare and install the dry pumping system as
described in Installation on page 78 of this manual.
Storage
07/2021 - ©Atlas CopcoPage 1281950840208_A
To Next Page
Loading...
Need help?
General
