Figure 16 Installation drawing - DWS 450 VSD+
A. Inlet valve assembly B. Utility sideA. Inlet valve assembly B. Utility side
6.2. Locate the dry pumping system
WARNING:
Suitable lifting equipment must be used to move the dry pumping system. It is
too heavy to lift by hand.
Move the dry pumping system to its operating position using any of the following
methods:
▪ Use a forklift or pallet truck to lift the dry pumping system.
07/2021 - ©Atlas CopcoPage 811950840208_A
Installation
To Next Page
Loading...
