▪ Push the Enter key. The screen that follows is shown:
▪ Use the Scroll keys to move the cursor to the Password icon (refer to the
menu icon).
▪ Use the Scroll keys to select Modify.
▪ Push the Enter key.
▪ Change the password as necessary.
4.17. Web server
Getting started
▪ All the controllers have a web server installed which lets them connect directly
to the company network or to a dedicated PC through a Local Area Network
(LAN). This permits to check some data and settings through a PC instead of
the display of the controller.
▪ If the pump has a SMAR
TBOX, the network connection of the controller is
already in use. To let the web server function, the network cable must be
unplugged from the SMARTBOX and replaced by the cable of the company
network. If the web sever and the SMARTBOX are necessary at the same
time, contact the local customer centre.
Configure a dedicated PC connection
▪ Make sure that you are logged in as administrator to change the IP settings.
▪ Use the internal network card from your computer or an USB to LAN network
card.
▪ Use an UTP cable (CAT 5e) to connect to the controller.
Elektronikon® graphic controller
07/2021 - ©Atlas CopcoPage 661950840208_A
To Next Page
Loading...
Need help?
General
