Next service
1. Next Service 2. Level
3. Running Hours 4. Actual
1. Next Service 2. Level
3. Running Hours 4. Actual
In the example above, the A Service level is programmed at 4000 running hours
and 0 hours have passed.
History
The History screen displays a list of all service actions done in the past, sorted by
date. The date at the top is the most recent service action. To see the details of a
completed service action (for example, Service level, Running hours or Real time
hours), use the Scroll keys to select the action and push the Enter key.
4.1
1. Modifying the setpoint
Menu icon, setpoint
Function
On the pumps with a frequency converter driven main‑motor, two dif
ferent
setpoints can be programmed. You can use this menu to select the active
setpoint.
Procedure
Start from the Main screen (refer to Main screen on page 33):
▪ Use the Scroll keys to move the cursor to the Menu action button.
▪ Push the Enter key. The screen that follows is shown:
Elektronikon® graphic controller
07/2021 - ©Atlas CopcoPage 501950840208_A
To Next Page
Loading...
Need help?
General
