5. Transportation
WARNING:
Do not drain the oil from the pumps whether dangerous substances have been
pumped or not. Blanking plates must be fitted to seal all vacuum inlet and outlet
ports (to prevent possible oil leakage). Ensure that the dry pumping system is
correctly labelled, if in doubt, contact us.
Follow the procedure laid out in Storage on page
128 and then read form HS1
and fill out form HS2, which can be found at the back of this manual.
07/2021 - ©Atlas CopcoPage 771950840208_A
Transportation
To Next Page
Loading...
Need help?
General
