13. Spares and accessories
WARNING:
When returning the dry pumping system to our service centre or our other
company, the requirements of Service on page 130, Spares and accessories on
page 131 and Return the equipment or components for service on page 130
must be complied with.
Note:
The oil must not be drained from the dry pumping system. It must be clearly
stated that the pump is full of oil when completing the HS2 form.
Our products, spares and accessories are available from our companies and
distributors worldwide. These centres employ service engineers who have
undergone our comprehensive training courses. Order the spare parts and
accessories from our nearest company or distributor. When ordering, state for
each part required:
1. Model and item number of the equipment.
2. Serial number (if any).
3. Item number and description of the part.
T
able 27 Accessories
Description
Item Number
Exhaust check valve kit NW50 3002615132
Exhaust silencer DWS 450/750 VSD+ 3002615133
Booster support kit for DWS VSD+ with ZRS 3002615134
Purge free kit for DWS VSD+ 3002615135
DP clean/solvent flush kit 3002615136
Pneumatic inlet valve for DWS VSD+ 3002615137
Table 28 Spares
Spare
Item Number
Drynert 25/6 lubricant:
1 kg (529 ml)
5 kg (2646 ml)
H11312021
H11312025
Cubicle vent filter kit G1950851774
Blow of
f valve service kit 750 3490790545
Blow off valve service kit 450 3490790546
For information about all other spares, refer to the customer parts manual
M58840845.
07/2021 - ©Atlas CopcoPage 1311950840208_A
Spares and accessories
To Next Page
Loading...
Need help?
General
