Atlas Copco FlexiROC T35 R User Manual

FlexiROC T35 R/T40 R 5 Controls
66 No: 3171473547.1 en
e Service menus
f Setting the service interval and reporting service.
7.3.1 Sensor calibration
Sensor calibration menu.
a Feed dump angle
b Feed swing
c Aim
d Boom Swing
e Cradle position
f Information on cradle speed
g GPS compass
Select a setting using the arrow keys and then reset using Enter. See the chapter on "Op-
erating the directional instrument" for further instructions.
7.3.2 Rock drill cradle
Rock drill cradle.
n Calibration of rock drill cradle:

Atlas Copco FlexiROC T35 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T35 R
Category	Construction Equipment
Language	English