Atlas Copco FlexiROC T35 R User Manual

FlexiROC T35 R/T40 R 5 Controls
68 No: 3171473547.1 en
The distance between the laser sensor and the drill bit should be in the box (a). This value
needs to be adjusted in the following cases:
n Changing length of drill steel
n Replacement of laser sensor
Load/Save parameters
Calibration values for the direction instrument can be saved on a USB card in this menu.
The card is connected to the rear of the display.

Atlas Copco FlexiROC T35 R Specifications

General

Brand	Atlas Copco
Model	FlexiROC T35 R
Category	Construction Equipment
Language	English