FlexiROC T35 R/T40 R 6 Operating
91 No: 3171473547.1 en
Remote control box.
7.
Set the winch potentiometer to desired pressure by turning it. Potentiometer R106.
Control panel for diesel engine.
8.
Activate the winch circuit. Switch S172, position (a).
9.
Activate wind-in manually to ensure the lock mechanism is fully engaged in the drum
before putting strain on the winch. Switch 173, position (a).
NOTE: Do not commence tramming without ensuring that the winch locking
mechanism (a) is fully engaged.
To Next Page
Loading...
