Audi A6 2005 User Manual

Note
♦ Maximum lateral run-out of steel brake disc: 0.06 mm
♦ Perform measurement with brake disc installed.
♦ Use dial gauge bracket VAS 6079/1 and dial gauge VAS 6079.
♦ Remove any dirt and rust from brake disc.
♦ Perform measurement 10 mm from outer edge of brake disc.
⇒ “6 Rear brakes, electronic parking brake and handbrake
(EPB)”, page 104
Rear brakes (RS 6, steel version)
Factory code (PR
No.)
1KJ
Brake caliper TRW C45 (19")
Brake disc, ventila‐
ted
∅
mm
356
Brake disc, thick‐
ness
mm 28
Brake disc, wear
limit
mm 26.4
Brake caliper, pis‐
ton
∅
mm
45
Brake pad thick‐
ness (including
backplate)
mm 16.9
Pad wear limit (in‐
cluding backplate)
mm 9
Note
♦ Maximum lateral run-out of steel brake disc: 0.06 mm
♦ Perform measurement with brake disc installed.
♦ Use dial gauge bracket VAS 6079/1 and dial gauge VAS 6079.
♦ Remove any dirt and rust from brake disc.
♦ Perform measurement 10 mm from outer edge of brake disc.
⇒ “6 Rear brakes, electronic parking brake and handbrake
(EPB)”, page 104
Ceramic rear brakes
Brake caliper TRW C45 (20")
Factory code (PR
No.)
1KK
Brake disc, ventila‐
ted
∅
mm
356
Brake disc, thick‐
ness
mm 28
Brake disc, wear
limit
The minimum thickness of the brake
disc is stamped onto the brake disc
hub as a wear limit specification.
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
4 Rep. gr.00 - Technical data

Audi A6 2005 Specifications

General

Brand	Audi
Model	A6 2005
Category	Automobile
Language	English