13 - Brake disc
❑ Wear limit ⇒ page 1
❑ Detach brake caliper prior to removing
❑ Thickness ⇒ page 1
❑ Allocation ⇒ page 1
WARNING
If one brake disc is dam‐
aged or worn, the other
discs must also be
checked for damage and
wear.
14 - Bolt
❑ Tightening torque: 5 Nm
15 - Wheel bolt
16 - Brake caliper housing
❑ Unscrew from brake carrier to renew brake pads
❑ Servicing brake caliper ⇒ page 130
17 - Guide pin
❑ 30 Nm
18 - Trim cap
Note
Detach protective cap before un‐
screwing guide pin. Fit protective
cap after screwing in guide pin.
1.2 Removing and installing brake pads
(1LT)
When renewing the brake pads, also check the brake disc for
wear. Refer to wear limit for brake disc
⇒ “1.2 Brakes, technical data”, page 1 .
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
58 Rep. gr.46 - Brakes - mechanism
To Next Page
Loading...
